Computer Parts Plus

USB 2.0 IDE Adapter

• USB adapter for IDE devices
• Easy to switch between devices
• USB 2.0 and USB 1.1 compatible
• Support installing with 2.5" HDD, 3.5" HDD, CD-ROM, CD-RW, COMBO, DVD-ROM, DVD±RW, DVD-RAM
• High-speed up to 480Mbps data transfer
• Power adapter included, input AC 100V-250V, 50-60Hz
• Hard drive not included

Equivalent Molex 4P & IDE(ATA) connectors for easy to connect in case outside

Use the latest SATA technology without spending extra money buying a new motherboard.This unit will allow an SATA drive to be connected to an IDE controller.  Increase your system's versatility and functionality by enhancing your PC with dual SATA and IDE inter-compatibilty. This product features quality materials and precision manufacturing to ensure dependability and data integrity.

• SATA Drive to IDE Controller
• Support all types of SATA storage devices.
• Supports serial ATA Generation 1 transfer rate of 1.5Gb/s.
• 100% hardware bridge converter to support PC & MAC.
• Compliant with Serial ATA 1.0 specifications.

Convert 2.5/3.5 Inch IDE and SATA Hard Drive to USB

Take advantage of SATA technology's power and efficiency without buying a new hard drive. This state-of-the-art IDE to SATA hard drive adapter allows you to use a IDE HD to a SATA connection, eliminating bulky cables and saving power.

• Marvell bridge Serial ATA control chip.
• Support 1 40-pin ID HD interface.
• Support 1 Serial ATA port.
• Support ATA 100/133 hard disk.
• Transmission speed up to 150 MB/s.
• Support Serial ATA 1.0.
• Low voltage.
• Cable length - 3 ft.

• Compliant with SATA1.0a Specification
• Compliant with USB 2.0 Specification
• Compliant with USB and SATA Mass Storage
• Supports dual SATA or eSATA to SATA operation
• Supports several RAID functions (Optional):
  • RAID 0: Disk Striping, allows two SATA disk to appear as a single higher speed disk b y sharing the load between the two disks.
  • RAID 1: Disk mirroring, writes the same data to both disks, so that the data maybe recovered in the event of one drive fails.
  • JBOD: Disk spanning, allows two drives to appear as one to the host machine
• Dual-Head eSATA connector plus one SATA connector and one USB 2.0 Connector
• Supports 2.5"/3.5"/5.25" SATA devices
• Operates with one USB 2.0 or one eSATA and two SATA HDD simultaneously
• External Power Supply Provided
• Supports Plug-and-Play